Pedalboard patch cables are a hotly debated topic on the internets, guitar forums & watering holes world wide. Luckily, our years of exceptional client testimonials and stellar real world performance using components & assembly techniques are being documented RIGHT HERE and NOW! As we say in the shop, “Fire the Irons!!!”

Giving people the knowledge & confidence to take on a soldering project such as a pedalboard patch cable build is what I live for! Personally, I believe soldering is a mandatory skill that any musician can & should MASTER. The benefits of this skill are numerous & rewarding!

GENERAL INFO:

  • A patch cable is generally a small cable with two 1/4” phone jacks used to connect two effects together. Realistically, a pedalboard patch cable can be any type of cable or any type of connector used to “patch” devices together.
  • There are 2 Sides to the patch cable story. Soldered and Solder-Less. The TWO main reasons why you DO NOT WANT TO GO SOLDER-LESS: 1. They cost more 2. They aren’t soldered!

WHAT YOU’ll NEED:

  • Cable & Plugs
  • Soldering Gear & Optional Equipment dependent upon work load
  • A little bit of time…

COST ANALY$I$:

DIY Solder-Less George L

  • George L 1/4” – $8.75
  • George L Cable – $2.75/ft
  • 6” Patch Cable Cost – $18.87ea
  • Bulk Purchase – $16.20ea

DIY Solder-Less Evidence Audio


1/4” TS/TRS PLUG & CABLE PARTS


CUSTOMIZABLE KIT FORMAT


BULK CABLE


OTHER USEFUL PATCHING GOODIES


TOOLS:

You can source these items from anywhere you please but we really like the knowledgeable people at B Dent Enterprises. They do free shipping on 99$ and up orders too!

  • Hakko FX888D Soldering Station – we have 2 of these operating daily for over 4 years with ZERO ISSUES!
  • Indium Solder 60/40 .032mm – we like this for every solder project we’ve come across. We run the iron at 720-740 degree’s
  • Soldering Tips: For the larger jobs, IE: most 1/4” & XLR jobs we use this chisel tip. For the smaller stuff like MIDI, we’ll use these fine tips.
  • 3rd Hands – A really nice setup that can also be DIY’d if you have the time
  • Some type of solder fume extractor is preferred – or workin in a well ventilated area
  • Stripers – We LOVE this Snap-On set, but anything with 12ga and 20ga will work if your using Mogami 2319 cable
  • Optional: Heat Gun for Heat Shrink
  • Optional: 1/4” Jack Fixture (pictured below) – Almost a necessary item if your doing a decent quantity of soldering
DIY PEDAL BOARD PATCH CABLES - COST ANALY$I$ + AUDIO PLUGS & CABLE + TOOLS & ASSEMBLY + VIDEO INSTALLATION 2
DIY PEDAL BOARD PATCH CABLES - COST ANALY$I$ + AUDIO PLUGS & CABLE + TOOLS & ASSEMBLY + VIDEO INSTALLATION 3

ASSEMBLY VIDEO GUIDES

Switchcraft 228 Tutorial

1/4” Stubby Straight

G&H Plugs Stubby Straight 1/4” connector – Quick and Dirty soldering how to…http://shop.westcoastpedalboard.com/G-H-Mini-Straight-1-4-Pedalboard-Jacks-p/diy-pedal-board-jack-plug180.htm&http://shop.westcoastpedalboard.com/West-Coast-Patch-Cable-Do-It-Yourself-p/pedalboard-patch-cable-kit-diy.htm

Posted by West Coast Pedal Board on Sunday, November 25, 2018

1/4” Mini VLP 2.0

"Quick and Dirty Series"How To Solder the new low profile 1/4” plug VLP2.0NNN https://shop.westcoastpedalboard.com/G-H-Mini-Right-Angle-1-4-Pedalboard-Jacks-p/diy-pedal-board-jack-vlpnnn2.0.htmOr in the kit format here:http://shop.westcoastpedalboard.com/West-Coast-Pedalboard-Patch-Cable-Do-It-Yourself-p/pedalboard-patch-cable-kit-diy.htm

Posted by West Coast Pedal Board on Wednesday, April 3, 2019

INSTALLATION GALLERY & MOTIVATION