[email protected]
1.707.836.7440
SONOMA COUNTY | CALIFORNIA USA
Pedalboard Menu
0

Pedalboard Patch Cable Right Angle Plugs – Square Plug SP500 (TS) Mono

Square Plug SP500
Pedalboard Patch Cable Right Angle Plugs - Square Plug SP500 (TS) Mono 1
Pedalboard Patch Cable Right Angle Plugs - Square Plug SP500 (TS) Mono 2
Pedalboard Patch Cable Right Angle Plugs - Square Plug SP500 (TS) Mono 3

Pedalboard Patch Cable Right Angle Plugs – Square Plug SP500 (TS) Mono

(97 customer reviews)

$3.83

Available: In Stock

SKU: DIY-Pedal-board-jack-sp500 Categories: ,
Share:

Square Plug Sp500 – 1/4″ Pedalboard Patch Cable Plugs

The smallest soldered mini right angled soldered 1/4″ phone plug known to man!  If you care about your pedalboard wiring, these mini plugs will soon become an integral part of your rig. We sold and used thousands of these with consistent success, thus, making these plugs industry standard the world over for professional rig builders. The very low profile Sp500 plug has tip and ground solder lugs and is super easy to put together.  They are great option when a small footprint is desired from a soldered plug.  We use these on most every pedalboard build that requires a small right angle 1/4″ connection. It works spectacular with the Mogami 2319 patch cable.

  • 1 3/8″ Length
  • 1/4″ Insert Point to Rear of Jacket
  • .75″ Maximum Width
  • .25″ Maximum Cable diameter allowance – no heat shrink use with Mogami 2319 which is .25″ diameter.

Wanna see how to solder these?

 

Weight 0.075 lbs

97 reviews for Pedalboard Patch Cable Right Angle Plugs – Square Plug SP500 (TS) Mono

4.9
Based on 97 reviews
5 star
96
96%
4 star
1
1%
3 star
1
1%
2 star
1
1%
1 star
0%
Powered by Customer Reviews plugin

Customer Images

Image #1 from Casey B.
Image #2 from Maykel O.
Image #3 from Jon G.
Image #4 from Zachary C.
Image #5 from Zachary C.
Image #1 from Casey B.

Casey B.

Love the SP500’s!

(0) (0)
Image #2 from Maykel O.

Maykel O.

As I say before, the overall quality of the product, including this one, is OK. However, as stated in the Picture above, it supposed to be MONO, and one of the 11 that I received is STEREO, and has a cable on it.

(0) (0)
Image #3 from Jon G.

Jon G.

(1) (0)
Image #4 from Zachary C.

Zachary C.

I love the parts I get from West Coast Pedal Boards! I use them in my own builds.

(0) (0)
Image #5 from Zachary C.

Zachary C.

I love the parts I get from West Coast Pedal Boards! I use them in my own builds.

(0) (0)
Image #6 from Shae

Shae

These plugs are amazing! I replaced all of my Lava cable tightropes for these, and was worried they would be too big comparatively. Very happily surprised and relieved that they take up the same space on my board in between pedals, and fit through the cable ports on my Temple Audio pedal board(unlike other generic pancake plugs I ordered). These give me the reliability of a soldered connection, and look super clean and professional, which is perfect! The only downside is not being able to put two of them together side-by-side on my Boss DD-7 if I use the tap tempo out, and mono input. Just a hair too wide. 100% would still recommend to everyone.

(0) (0)
Image #7 from Shae

Shae

These plugs are amazing! I replaced all of my Lava cable tightropes for these, and was worried they would be too big comparatively. Very happily surprised and relieved that they take up the same space on my board in between pedals, and fit through the cable ports on my Temple Audio pedal board(unlike other generic pancake plugs I ordered). These give me the reliability of a soldered connection, and look super clean and professional, which is perfect! The only downside is not being able to put two of them together side-by-side on my Boss DD-7 if I use the tap tempo out, and mono input. Just a hair too wide. 100% would still recommend to everyone.

(0) (0)
Image #8 from Shae

Shae

These plugs are amazing! I replaced all of my Lava cable tightropes for these, and was worried they would be too big comparatively. Very happily surprised and relieved that they take up the same space on my board in between pedals, and fit through the cable ports on my Temple Audio pedal board(unlike other generic pancake plugs I ordered). These give me the reliability of a soldered connection, and look super clean and professional, which is perfect! The only downside is not being able to put two of them together side-by-side on my Boss DD-7 if I use the tap tempo out, and mono input. Just a hair too wide. 100% would still recommend to everyone.

(0) (0)
Image #9 from Shae

Shae

These plugs are amazing! I replaced all of my Lava cable tightropes for these, and was worried they would be too big comparatively. Very happily surprised and relieved that they take up the same space on my board in between pedals, and fit through the cable ports on my Temple Audio pedal board(unlike other generic pancake plugs I ordered). These give me the reliability of a soldered connection, and look super clean and professional, which is perfect! The only downside is not being able to put two of them together side-by-side on my Boss DD-7 if I use the tap tempo out, and mono input. Just a hair too wide. 100% would still recommend to everyone.

(0) (0)
Image #1 from Casey B.
Image #2 from Maykel O.
Image #3 from Jon G.
Image #4 from Zachary C.
Image #5 from Zachary C.
Image #6 from Shae
Image #7 from Shae
Image #8 from Shae
Image #9 from Shae
  1. Donny Michael
    Verified owner
    (0) (0)
  2. Donna W.
    Verified owner
    (0) (0)
  3. Jim McCloud
    Verified owner
    (0) (0)
  4. Peggy Hilton
    Verified owner
    (0) (0)
  5. Jeffrey M.
    Verified owner

    Excellent quality, easy to solder wires on the leads. Overall good design since they take up minimum space on my pedalboard.

    (0) (0)

Only logged in customers who have purchased this product may leave a review.

Cancel

Related products

Call Now ButtonHave Questions?