1.707.836.7440
SONOMA COUNTY | CALIFORNIA USA

Modular Pedalboard Power Harness System – 110 to 250 Volt World Compatible

View cart “Indicator Lamp Holder – Dial Indicator/Bayonet Fixture – 110 to 250 Volt World Compatible” has been added to your cart.

Modular Pedalboard Power Harness System – 110 to 250 Volt World Compatible

(24 customer reviews)

$30.00

Available: In Stock

-

If you want a toggle switch to turn the board on and off without removing the power cable, make your mark here!

Do you want our sweet indicator lamp assembly on your harness?

Choose the connection here that fits your power supply.

SKU: DIY-PedalBoard-Harness-Modular Categories: ,
Share:

Modular Pedalboard Power Harness System

  • The IEC Inlet is rated for 110-250 Volts so this is compatible world wide

Never worry about switching pedal power devices, again!  Our innovative Modular Pedalboard Power Harness System is super easy to install & designed for maximum flexibility. The system allows you to easily and quickly swap out the pigtail interface to satisfy whatever type of power requirement your pedalboard and/or pedal powering device(s) may require! The pigtail connects via the Deutsch Connector system; a world renown connector brand known for safe and reliable connections in the roughest of environments!

The base system is a permanent installation including:

  1. IEC 5-15 Power Inlet
  2. (Optional) Carling master ON/Off toggle switch
  3. (Optional) 110-120Volt Fender style jewel lamp assembly with LED bulb and your color choice of lens (Red, Blue, Green, Amber)

The pigtail harness portion of the system is fully modular:

  1. Choose which power supply pigtail assembly fits your pedal power device(s)
  2. More then 1 pigtail can be attached via Y-Split for multiple power supply/device hookups. Power a device using a C13 inlet like Voodoo Lab, Strymon or True Tone and simultaneously power a device like the MXR DC Brick that utilizes a completely different 5-15P inlet option.

Need the pigtail only? Need a Y Splitter to power more then one device?

  • Includes all mounting hardware
  • Grab an IEC Power Cable to go from your wall to the board, offered at different lengths!
  • Instructions Written and Video Located on our Download Page

Weight 0.5 lbs

24 reviews for Modular Pedalboard Power Harness System – 110 to 250 Volt World Compatible

5.0
Based on 24 reviews
5 star
95
95%
4 star
4
4%
3 star
0%
2 star
0%
1 star
0%

Customer Images

Image #1 from Robert Furia
Image #2 from Robert Furia
Image #3 from Robert Furia
Image #4 from Robert Furia
Image #5 from Robert Furia
Image #1 from Robert Furia

Robert Furia

Started with this wiring unit, then added jacks & wiring necessary for the build I had in mind for an acoustic board. Took a while to complete while I was waiting on the Radial pre-amp, but everything turned out great. The West Coast pedalboard DIY components perform perfectly and their installation videos & instructions are excellent.

(0) (0)
Image #2 from Robert Furia

Robert Furia

Started with this wiring unit, then added jacks & wiring necessary for the build I had in mind for an acoustic board. Took a while to complete while I was waiting on the Radial pre-amp, but everything turned out great. The West Coast pedalboard DIY components perform perfectly and their installation videos & instructions are excellent.

(0) (0)
Image #3 from Robert Furia

Robert Furia

Started with this wiring unit, then added jacks & wiring necessary for the build I had in mind for an acoustic board. Took a while to complete while I was waiting on the Radial pre-amp, but everything turned out great. The West Coast pedalboard DIY components perform perfectly and their installation videos & instructions are excellent.

(0) (0)
Image #4 from Robert Furia

Robert Furia

Started with this wiring unit, then added jacks & wiring necessary for the build I had in mind for an acoustic board. Took a while to complete while I was waiting on the Radial pre-amp, but everything turned out great. The West Coast pedalboard DIY components perform perfectly and their installation videos & instructions are excellent.

(0) (0)
Image #5 from Robert Furia

Robert Furia

Started with this wiring unit, then added jacks & wiring necessary for the build I had in mind for an acoustic board. Took a while to complete while I was waiting on the Radial pre-amp, but everything turned out great. The West Coast pedalboard DIY components perform perfectly and their installation videos & instructions are excellent.

(0) (0)
Image #6 from Glenn Bell

Glenn Bell

I was called and notified that the 3 port surge protector is no longer available. This customer service is what encourages me to purchase again. Plus free picks!

(0) (0)
Image #7 from joseph coloroso

joseph coloroso

I think it came out great. I appreciate all your guidance.

(0) (0)
Image #8 from joseph coloroso

joseph coloroso

I think it came out great. I appreciate all your guidance.

(0) (0)
Image #9 from joseph coloroso

joseph coloroso

I think it came out great. I appreciate all your guidance.

(0) (0)
Image #1 from Robert Furia
Image #2 from Robert Furia
Image #3 from Robert Furia
Image #4 from Robert Furia
Image #5 from Robert Furia
Image #6 from Glenn Bell
Image #7 from joseph coloroso
Image #8 from joseph coloroso
Image #9 from joseph coloroso
  1. 5 out of 5

    I built the board myself and this harness made it so easy to put it all together. I made it for my dad for his birthday and im considering making one for myself now. You guys rock!

    Ryland
    Ryland
  2. 5 out of 5
    mike m.
    mike m.
  3. 5 out of 5

    Works great – Spence even did a very quick call with me to point me in the right direction. Very much appreciated.

    Gregory B.
    Gregory B.
  4. 5 out of 5

    Works great

    Greg Pfeiffer
    Greg Pfeiffer
  5. 5 out of 5
    Tim
    Tim

Only logged in customers who have purchased this product may leave a review.

Cancel

Call Now ButtonWanna Chat with a LIVE Human?