Modular Pedalboard Power Harness System – 110 to 250 Volt World Compatible

Ships in 24 Business Hours or Less

(29 customer reviews)

$50.00

Power Supply Pigtail

Choose the connection here that fits your power supply. The base price includes the Straight IEC cable.

IEC Straight IEC Right Angle +$10.00 IEC Left Angle +$10.00 5-15P Wall Outlet Style +$5.00 C5 Mickey Mouse - older Cioks +$8.00 3 Port Power Strip +$18.00
AC Power ON/OFF Switch

If you want a toggle switch to turn the board on and off without removing the power cable, make your mark here!

Indy/Indicator Lamp Assembly

Do you want our sweet indicator lamp assembly on your harness?

    Description

    Modular Pedalboard Power Harness System

    • The IEC Inlet is rated for 110-250 Volts so this is compatible world wide

    Never worry about switching pedal power devices, again!  Our innovative Modular Pedalboard Power Harness System is super easy to install & designed for maximum flexibility. The system allows you to easily and quickly swap out the pigtail interface to satisfy whatever type of power requirement your pedalboard and/or pedal powering device(s) may require! The pigtail connects via the Deutsch Connector system; a world renown connector brand known for safe and reliable connections in the roughest of environments!

    The base system is a permanent installation including:

    1. IEC 5-15 Power Inlet
    2. (Optional) Carling master ON/Off toggle switch
    3. (Optional) 110-120Volt Fender style jewel lamp assembly with LED bulb and your color choice of lens (Red, Blue, Green, Amber)

    The pigtail harness portion of the system is fully modular:

    1. Choose which power supply pigtail assembly fits your pedal power device(s)
    2. More then 1 pigtail can be attached via Y-Split for multiple power supply/device hookups. Power a device using a C13 inlet like Voodoo Lab, Strymon or True Tone and simultaneously power a device like the MXR DC Brick that utilizes a completely different 5-15P inlet option.

    Need the pigtail only? Need a Y Splitter to power more then one device?

    • Includes all mounting hardware
    • Grab an IEC Power Cable to go from your wall to the board, offered at different lengths!
    • Instructions Written and Video Located on our Download Page

    Modular Pedalboard Power Harness System - 110 to 250 Volt World Compatible 1

    Additional information

    Weight 0.5 lbs
    Dimensions 12 × 6 × 2 in

    29 reviews for Modular Pedalboard Power Harness System – 110 to 250 Volt World Compatible

    Powered byCusRev
    5.0
    Based on 29 reviews
    5 star
    96
    96%
    4 star
    3
    3%
    3 star
    0%
    2 star
    0%
    1 star
    0%

    Customer Images

    Image #1 from Alex Leyva
    Video #1 from Greg Pfeiffer
    Image #1 from Robert Furia
    Image #2 from Robert Furia
    Image #3 from Robert Furia
    Image #4 from Robert Furia
    Image #5 from Robert Furia
    Image #1 from Glenn Bell
    Image #1 from joseph coloroso
    Image #2 from joseph coloroso
    Image #1 from Alex Leyva

    Alex Leyva

    (0) (0)
    Video #1 from Greg Pfeiffer

    Greg Pfeiffer

    Works great

    (0) (0)
    Image #1 from Robert Furia

    Robert Furia

    Started with this wiring unit, then added jacks & wiring necessary for the build I had in mind for an acoustic board. Took a while to complete while I was waiting on the Radial pre-amp, but everything turned out great. The West Coast pedalboard DIY components perform perfectly and their installation videos & instructions are excellent.

    (0) (0)
    Image #2 from Robert Furia

    Robert Furia

    Started with this wiring unit, then added jacks & wiring necessary for the build I had in mind for an acoustic board. Took a while to complete while I was waiting on the Radial pre-amp, but everything turned out great. The West Coast pedalboard DIY components perform perfectly and their installation videos & instructions are excellent.

    (0) (0)
    Image #3 from Robert Furia

    Robert Furia

    Started with this wiring unit, then added jacks & wiring necessary for the build I had in mind for an acoustic board. Took a while to complete while I was waiting on the Radial pre-amp, but everything turned out great. The West Coast pedalboard DIY components perform perfectly and their installation videos & instructions are excellent.

    (0) (0)
    Image #4 from Robert Furia

    Robert Furia

    Started with this wiring unit, then added jacks & wiring necessary for the build I had in mind for an acoustic board. Took a while to complete while I was waiting on the Radial pre-amp, but everything turned out great. The West Coast pedalboard DIY components perform perfectly and their installation videos & instructions are excellent.

    (0) (0)
    Image #5 from Robert Furia

    Robert Furia

    Started with this wiring unit, then added jacks & wiring necessary for the build I had in mind for an acoustic board. Took a while to complete while I was waiting on the Radial pre-amp, but everything turned out great. The West Coast pedalboard DIY components perform perfectly and their installation videos & instructions are excellent.

    (0) (0)
    Image #1 from Glenn Bell

    Glenn Bell

    I was called and notified that the 3 port surge protector is no longer available. This customer service is what encourages me to purchase again. Plus free picks!

    (0) (0)
    Image #1 from joseph coloroso

    joseph coloroso

    I think it came out great. I appreciate all your guidance.

    (0) (0)
    Image #2 from joseph coloroso

    joseph coloroso

    I think it came out great. I appreciate all your guidance.

    (0) (0)
    Image #3 from joseph coloroso

    joseph coloroso

    I think it came out great. I appreciate all your guidance.

    (0) (0)
    Image #1 from Alex Leyva
    Video #1 from Greg Pfeiffer
    Image #1 from Robert Furia
    Image #2 from Robert Furia
    Image #3 from Robert Furia
    Image #4 from Robert Furia
    Image #5 from Robert Furia
    Image #1 from Glenn Bell
    Image #1 from joseph coloroso
    Image #2 from joseph coloroso
    Image #3 from joseph coloroso
    1-5 of 29 reviews
    1. (0) (0)
    2. (0) (0)
    3. I had an issue with the indy light not functioning, but Spence got me squared away almost immediately, and now everything is perfect. I loved the finished board so much, I built another for my acoustic rig 🙂

      (0) (0)
    4. (0) (0)
    5. Image #1 from Alex Leyva
      (0) (0)
    Add a review
    You must be logged in to post a review Log In

    modular pedalboard power harness system
    Modular Pedalboard Power Harness System – 110 to 250 Volt World Compatible

    $50.00

    Power Supply Pigtail

    Choose the connection here that fits your power supply. The base price includes the Straight IEC cable.

    IEC Straight IEC Right Angle +$10.00 IEC Left Angle +$10.00 5-15P Wall Outlet Style +$5.00 C5 Mickey Mouse - older Cioks +$8.00 3 Port Power Strip +$18.00
    AC Power ON/OFF Switch

    If you want a toggle switch to turn the board on and off without removing the power cable, make your mark here!

    Indy/Indicator Lamp Assembly

    Do you want our sweet indicator lamp assembly on your harness?

    Pedalboarding Hotline $3/Min